Files on every panel
Attach specs, QA photos and PDFs — with preview — to a project, panel or group. Everyone sees the latest, in real time.
Plugs into your machines
Run your whole LSF shop, always in sync
Proposal-first planning
Not a generic ERP, not a CAD add-on, not a spreadsheet. Plug in your machines and the shop runs on one live picture: schedule the whole workshop, keep coil stock accurate to the panel, and let your machines report what they actually built.
- Coil stock kept accurate to the panel
- One live schedule for the whole shop
- Your roll-forming machines, always in sync
Works with the roll-forming machines you already run
…and more
Built only for light-gauge steel framing (LSF) — also known as cold-formed steel (CFS).
The problem
When stock lies, every plan starts wrong
In most light-gauge steel shops the data isn't missing — it's scattered. Sales, the schedule, the coil rack and the machines each tell a different story, so someone spends the week firefighting the plan instead of running the shop.
How most shops run today
- The schedule lives in a spreadsheet someone re-keys by hand
- You find out you're out of C140 the day the line needs it
- Operators re-enter what they built into two or three systems
- Coil stock is a guess until someone walks the floor and counts
What that costs on the floor
- A late material shortage stops a line that was "ready" on paper
- The same coil gets promised to two jobs at once
- Dates get committed on gut feel, then quietly slip
- Every plan starts from a stock number nobody fully trusts
Reliable stock is not a side module.
MyAssembly is built on a simple operational truth: if stock does not reflect what the workshop actually ran, every planning decision starts from a wrong assumption. Machine Link captures the truth of the present. Planning builds the truth of the future. Both must stay connected.
Machine Link
The truth of the present
Real machine execution feeds stock, material consumption, and production progress so the operational state stays closer to workshop reality without constant manual corrections.
Planning
The truth of the future
Quote-to-production proposals, capacity visibility, and deadline feasibility rely on credible stock to produce credible commitments.
When both truths stay connected, teams stop rebuilding the plan from assumptions.
How it works
How MyAssembly works
Proposal first, not magic. MyAssembly reads the quote, builds a feasible production path, and keeps critical operational loops aligned with real workshop execution.
Quote input
One-click quote import
Drop your IFC or paste a pre-filled URL — MyAssembly does the rest.
Execution feed from the workshop
- 13:43:36 PF-02 started Q-2416 → stock and completion updated
- 13:43:36 Q-2419 released → line load recalculated before commitment
- 13:43:36 Coil A124 consumed → available stock corrected from execution
1
Read the quote
MyAssembly reads quantities, material needs, and induced production load from the quote that already exists.
→ Actionable planning input
2
Get a feasible production proposal
The system proposes line allocation, sequencing, and a planning path based on capacities and operational constraints.
→ Charge and deadline visibility
3
Validate and release faster
Teams review charge, feasibility, and deadlines before sending work to the shop floor and committing dates.
→ Feasible commitment before release
4
Keep stock aligned through execution
Machine-fed production updates critical operational flows so stock stays more reliable without constant manual re-entry.
→ Stock connected to workshop reality
Product pillars
Built on 2 connected operational pillars
Two pillars hold the shop together: machine-fed execution that keeps stock honest, and quote-to-production planning that proves capacity and deadlines before you commit. Four capabilities make them real — LSF auto-scheduling, connected stock, Machine Link, and one workspace from quote to delivery.
QUOTE-TO-PRODUCTION
PLANNING
Turn commercial demand into an actionable production proposal instead of rebuilding planning manually for every new quote.
QUOTE Q-2416
184 panels · requested week 4
INPUT READY
PROPOSED SPLIT
PF-02 58% · PF-04 42%
PLANNING PROPOSAL
MATERIAL CHECK
C89-1.2 and Track 70 confirmed
Packaging slot available in W4
Release after planner validation
ACTIONABLE
CAPACITY AND EXECUTION
VISIBILITY
See line load, sequencing tension, and deadline feasibility before release so the workshop is not forced to solve planning credibility after commitment.
PF-02 LOAD
82% in W3 after Q-2416 release
VISIBLE EARLY
DATE CHECK
Week 4 requested date holds if released by Tuesday 14:00
DECISION WINDOW
SEQUENCING TENSION
Punching queue +6h, visible before launch
NO BLIND COMMITMENT
RELIABLE STOCK
CONNECTED TO REALITY
Keep forecast, allocation, and real execution in the same loop so stock remains credible when the workshop runs and priorities change.
COIL A124
1.4t remaining after PF-02 execution
REAL STATE
SHORTAGE WARNING
Order 3.0t of C89-1.2 before week 5 release
VISIBLE EARLY
EXECUTION EVENT
86 panels completed on Q-2416 at 11:42
MACHINE-FED
Reliable execution truth makes planning more credible.
Planning gives execution a clearer path.
Collaboration suite
Run the job, not just the schedule
Open any project, panel or group and the whole team works in one place — files, comments and checklists, live, with no extra CAD seat.
Comments with @mentions
Threaded discussions on projects, panels and allocations. Mention a teammate, resolve when it's done, and see who has read it.
Checklists that travel with the work
Build custom checks on any project, panel or group and tick them off as the floor moves. Your process, enforced.
Included in Pro
Interactive 3D, no CAD seat
Select, isolate, hide and focus panels in the browser, overlay live production status, and review together with shared cursors.
Transformation
From manual reconstruction to operationally credible production
MyAssembly closes the gap between the quote, the plan, workshop capacity, and execution-fed stock so teams can release work with more confidence.
Manual reconstruction
- Quote to manual rework
- Human arbitration to create the plan
- Weak visibility on induced load
- Stock maintained by corrections and re-entry
- Late discovery of capacity tension
- Delivery dates committed with uncertainty
Operationally credible production
- Quote becomes a planning proposal
- Load is distributed across lines and steps
- Capacity and delay feasibility become visible earlier
- Workshop follows a clearer execution path
- Real execution updates operational state and stock
- Delivery commitment becomes more credible
Use cases
What teams use MyAssembly for
Each use case starts from the same reality: the quote exists, but confidence in the production plan and stock does not.
Before accepting a new project
Check induced load, line impact, material tension, and whether the requested date is realistic before answering the customer.
- See which line absorbs the load
- Spot material tension before commitment
- Commit dates with a more credible view
At production launch
Turn the quote into a proposed production path and release work with clearer line allocation, sequencing, and material logic.
- Review the proposal before sending work
- Make line load and bottlenecks visible
- Release faster without blind arbitration
During workshop execution
Keep stock and operational state aligned with what machines actually ran so the plan stays closer to reality through the week.
- Update stock from machine execution
- Correct completion and material state together
- Reduce manual reconciliation in the workshop
When planning starts drifting
Reduce the gap between what was planned, what was consumed, and what the workshop actually executed.
- Compare planned vs actual execution continuously
- Detect material drift before it becomes a shortage
- Re-align the plan from real workshop data
Why now
From spreadsheets to one live system
Stop re-keying the same numbers into disconnected files. One live system gives the whole shop the same picture — so scheduling gets cleaner, waste drops, and deadlines hold, from the very first project.
FAQ
Questions production teams ask before booking a demo
It runs your whole shop on one live system: it turns a quote into a feasible production plan, shows capacity and deadlines before you commit, and keeps coil stock aligned with what your machines actually built.
No. MyAssembly handles the operational planning and stock loop close to the workshop. It can coexist with your ERP and does not require replacement to evaluate fit.
Not at all — it's not a design, BIM, Revit or detailing tool. It starts once the quote exists and focuses on production planning and execution-linked stock for LSF workshops. For design, our dedicated project is Stud.
Machine events update operational state and material consumption from real execution, so stock stays closer to workshop reality without critical operator re-entry.
Yes. That is a common starting point. MyAssembly is meant to replace manual quote-to-plan reconstruction and make capacity and stock visibility more credible.
Yes. The pilot can start with one real flow and one connected machine, which is relevant for many workshops running one to three rollformers.
We install Machine Link on one machine remotely and schedule a real project: one quote in, one planning proposal, one connected production loop, and one live stock model on a defined scope — so value is visible in weeks, not a big-bang rollout. You only pay if it earns its place.
It makes induced load, line allocation, material tension, and deadline feasibility visible before release, so teams can commit dates with a more credible operational view.
Yes. MyAssembly is machine-agnostic — Machine Link runs today on Howick, Pinnacle and Scottsdale roll-formers and connects whatever brand you already own. You keep your hardware; we replace the spreadsheets.
Yes. Every project, panel and group carries shared files, threaded comments with @mentions, and checklists — all live, in the browser, with no extra CAD seat.